Giới thiệu về hệ thống VMware


As part of the on-going VMware article series, earlier we discussed about VMware virtualization fundamentals, and how to install VMware Server 2.

In this article, let us discuss about how to install VMware ESXi.

VMware ESXi is free. However, the software comes with a 60 days evaluation mode. You should register on VMware website to get your free license key to come out of the evaluation mode. Once the ESXi is installed, you can either user vSphere Client on the Direct Console User Interface to administer the host.

VMware ESXi is based on hypervisor architecture that runs directly on top of a hardware as shown below.

1. Download ESXi server

Get the software from the VMware ESXi download page.

Following are the various download options available. Select “ESXi 4.0 Update 1 Installable (CD ISO) Binary (.iso)” and burn a CD.

  • ESXi 4.0 Update 1 Installable (CD ISO)
  • Upgrade package from ESXi Server 3.5 to ESXi Server 4.0 Update 1
  • Upgrade package from ESXi Server 4.0 to ESXi Server 4.0 Update 1
  • VMware vSphere Client and Host Update Utility

2. VMware VMvisor Boot Menu

Once you insert the ESXi CD and reboot the server, it will display a boot menu with an option to launch “ESXi Installer” as shown below.

3. VMware ESXi Installer Loading

While the installer is loading all the necessary modules, it will display the server configuration information at the top as shown below. In this example, I was installing VMware ESXi 4.0 on a Dell PowerEdge 2950 server.

4. New ESXi Install

Since this is a new installation of ESXi, select “Install” in the following screen.

5. Accept VMware EULA

Read and accept the EULA by pressing F11.

6. Select a Disk to Install VMware ESXi

VMware ESXi 4.0.0 Installer will display all available disk groups. Choose the Disk where you would like to install the ESXi. It is recommended to choose the Disk0.

7. Confirm ESXi Installation

Confirm that you are ready to start the install process.

8. Installation in Progress

The installation process takes few minutes. While the ESXi is getting installed, it will display a progress bar as shown below.

9. ESXi Installation Complete

You will get the following installation completed message that will prompt you to reboot the server.

10. ESXi Initial Screen

After the ESXi is installed, you’ll get the following screen where you can configure the system by pressing F2.

In the next article, let us review how to perform the initial ESXi configuration.

VMware Virtualization Fundamentals – VMware Server and VMware ESXi

We are starting a new series of articles on VMware that will help you install, configure and maintain VMware environments.

In this first part of the VMware series, let us discuss the fundamental concepts of virtualization and review the VMware virtualization implementation options.

Following are few reasons why you might want to think about virtualization for your environment.

  • Run multiple operation systems on one server. For example, instead of having development-server and QA-server, you can run both development and QA on a single server.
  • You can have multiple flavours of OS on one server. For example, you can run 2 Linux OS, 1 Windows OS on a single server.
  • Multiple OS running on the server shares the hardware resources among them. For example, CPU, RAM, network devices are shared among development-server and QA-server running on the same hardware.
  • Allocate hardware resources to different applications based on the utilization. For example, if you have 8GB of RAM on the server, you can assign less RAM to one virtual machine (2GB to development-server) and more RAM (6GB to QA-server) to another virtual machine that is running on that server
  • High availability and business continuity. If VMware is implemented properly, you can migrate a virtual machine from one server to another server quickly without any downtime.
  • This reduces the operational cost and power consumption. For example, instead of buying and running two servers, you will be using only one server and run both development and QA on it.

On a high level, there are two ways for you to get started on the virtualization using VMware products. Both of these are available for free from VMware.

1. VMware Server

VMware Server runs on top of an existing host operating system (either Linux or Windows). This is a good option to get started, as you can use any of the existing hardware along with it’s OS. VMware server also support 64-bit host and guest operating system. You also get VMware Infrastructure web access management interface and Virtual Machine console.

Fig: Virtual Machine running on top of VMware Server

2. VMware ESXi

VMware ESXi is based on the hypervisor architecture. VMware ESXi runs directly on the hardware without the need of any host operating system, which makes is extremely effective in terms of performance. This is the best option to implement VMware for production usage.

Fig: Virtual Machine running on top of VMware ESXi

Following are some of the key features of VMware ESXi:

  • Memory compression, over commitment and deduplication.
  • built-in high available with NIC teaming and HBA multipathing.
  • Intelligent CPU virtualization
  • Highly compatible with various servers hardware, storage and OS.
  • Advanced security with VMSafe, VMKernel protection and encryption.
  • Easy management using vsphere client, vCenter server and command line interface

About thangletoan

Hallo Aloha

Posted on 27/05/2012, in Công nghệ và Giáo dục, Sống và đam mê khoa học, VMware ESXi. Bookmark the permalink. Để lại bình luận.

Gửi phản hồi

Mời bạn điền thông tin vào ô dưới đây hoặc kích vào một biểu tượng để đăng nhập:

WordPress.com Logo

Bạn đang bình luận bằng tài khoản WordPress.com Log Out / Thay đổi )

Twitter picture

Bạn đang bình luận bằng tài khoản Twitter Log Out / Thay đổi )

Facebook photo

Bạn đang bình luận bằng tài khoản Facebook Log Out / Thay đổi )

Google+ photo

Bạn đang bình luận bằng tài khoản Google+ Log Out / Thay đổi )

Connecting to %s

%d bloggers like this: